Forum Replies Created
Hi everyone,
I’m encountering Error 0x80073712 on my Windows PC, usually when trying to install updates. I’m not sure what’s causing it or how to resolve it safely.
Can someone explain the possible causes of Error 0x80073712 and provide step-by-step solutions to fix it? I want to make sure my system stays stable and doesn’t lose any data during the process.
Thanks in advance for your help!
Hi everyone,
I recently encountered the DAM_WATCHDOG_TIMEOUT error on my Windows PC, which caused a blue screen and forced a restart. I’m not sure what triggers this error or how to prevent it from happening again.
Can someone explain the possible causes of DAM_WATCHDOG_TIMEOUT and provide step-by-step methods to fix it safely? I’d like solutions that don’t risk data loss or system instability.
Thanks in advance!
Hi everyone,
After installing the Windows 10 cumulative update KB5062554, I noticed that some of my files and data seem to have disappeared. I’m not sure if they were deleted, moved, or corrupted during the update process.
Can someone explain safe methods to recover data lost after this update? I want solutions that minimize the risk of further data loss and ideally allow me to restore everything as it was.
Thanks for your guidance!
I recently formatted my Hard Drive in Windows 11 and lost all the data. Is it possible to get it recovered?
And if yes, please sugguest the best ways possible.
This usually happens when Windows gets stuck because of a bad update, driver issue, or corrupted system file. First, unplug all external devices and do a full shutdown by holding the power button for 10 seconds, then restart. If it’s still stuck, turn your PC on and off three times to open the recovery menu (WinRE). From there, go to Troubleshoot → Advanced options → Startup Repair. If that doesn’t help, boot into Safe Mode and run sfc /scannow and DISM /Online /Cleanup-Image /RestoreHealth from Command Prompt. You can also try System Restore or Uninstall Updates under Advanced options. If nothing works, use WinRE to copy your files, then Reset This PC. Don’t worry, these steps are safe and fix this issue most of the time.
Hey, this usually happens when Windows creates a temporary user profile after an update like KB5062554, making it seem like your files are gone. First, check if your data is just hidden — open File Explorer, go to C:\Users, and see if there’s another folder with your old username. If yes, your files are likely there. You can copy them back manually. If that doesn’t help, try System Restore to roll back before the update, which often brings files back. Avoid reinstalling or writing new data to the drive to prevent overwriting. If nothing works and the files aren’t visible anywhere, you can use Stellar Data Recovery to safely scan and recover your missing files.
Error 0x80073712 means some Windows update files are missing or damaged. First, back up your data and create a restore point. Run the Windows Update troubleshooter (Settings → System → Troubleshoot → Other troubleshooters). If it doesn’t help, open Command Prompt as admin and run these one by one:
DISM /Online /Cleanup-Image /RestoreHealth
sfc /scannow
Then try updating again.
If it still fails, stop update services, rename the SoftwareDistribution and catroot2 folders, and restart the services. Finally, if nothing works, do an in-place repair using the Media Creation Tool — it keeps your files and apps safe.
Hey try these quick steps. For “No Bootable Image Found”, open BIOS and check if your hard drive is detected and set as the first boot device. If not, reseat the drive cable or NVMe. If detected but still won’t boot, start your PC with Windows 11 installation media, choose Repair your computer → Troubleshoot → Startup Repair. If that fails, open Command Prompt and run:
bootrec /fixmbr, bootrec /fixboot, bootrec /scanos, and bootrec /rebuildbcd.
For the UsbHub3.sys BSOD, unplug all USB devices and boot into Safe Mode. Then update or roll back your USB and chipset drivers, run Windows Update, and in Command Prompt run sfc /scannow followed by DISM /Online /Cleanup-Image /RestoreHealth. Also turn off USB selective suspend in Power Options. If the crash stops after unplugging a device, that device or its driver is the cause.
Hey, that message usually means your RAM has a problem. First, open Event Viewer → Windows Logs → System and check the details under “MemoryDiagnostics Results.” Then shut down your PC, remove and reinsert the RAM sticks to ensure they’re seated properly. Try booting with one stick at a time to see which one causes the issue.
If you’re still unsure, make a MemTest86 USB and run it, it’s better at catching RAM errors. If one stick fails, replace it. You can also update your BIOS and turn off XMP or overclocking while testing. Keep a backup of your data since bad RAM can sometimes corrupt files. If errors keep showing up even with new RAM, the motherboard may be at fault.
Hey, this error usually means your PC can’t find Windows to boot from. First, go to BIOS and check if your hard drive or SSD is showing up. If it is, make sure “Windows Boot Manager” is at the top of the boot order. If it’s missing, switch between UEFI and Legacy mode to match how Windows was installed. If the drive isn’t detected, turn off the PC, unplug and reconnect the drive cables, or test the drive on another computer.
If the drive shows up but still won’t boot, create a Windows 11 recovery USB on another PC, boot from it, and try Startup Repair. If that fails, open Command Prompt and run these one by one:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
Before doing anything risky, copy your important files using another computer or a bootable USB.
Hey! This error usually happens when the file system on your drive gets corrupted, which can be due to unsafe removal, sudden power cuts, virus attacks, or bad sectors on the drive. First, avoid formatting or writing anything to the drive to prevent data loss. Start by running chkdsk X: /f /r in Command Prompt as admin (replace X with your drive letter) to scan and repair errors. If the drive still shows unreadable, try assigning a new drive letter in Disk Management. For recovering your files safely before doing any repair, Stellar Data Recovery is a good option. Once your data is backed up, you can format the drive to restore normal use.
Hey, what you’re seeing is Windows hanging on the Group Policy Client service, which is what GPSVC stands for. It basically manages system and user policies, and if it gets stuck, your PC waits indefinitely at startup. Common causes are corrupt user profiles, pending updates, or issues with certain services starting in the wrong order. Quick fixes you can try are booting into Safe Mode and running sfc /scannow and DISM /Online /Cleanup-Image /RestoreHealth in Command Prompt, checking for stuck Windows Updates, or creating a new user profile to see if it bypasses the hang.
Hi everyone,
My Windows PC is stuck on the Welcome screen during startup. It doesn’t proceed to the desktop, and I’ve tried restarting several times without success.
Can someone explain why this happens and provide practical solutions to fix it? I’ve heard there are multiple methods—like 6 possible fixes—but I’m looking for clear, step-by-step instructions that are safe and won’t risk my data.
Thanks in advance!
Hi everyone,
I recently experienced a Blue Screen of Death (BSOD) on my Windows PC, and the error message pointed to wdfilter.sys. I’m not sure what causes this file to trigger a BSOD or how to resolve it safely.
Can someone explain the possible reasons behind the wdfilter.sys BSOD and provide step-by-step methods to fix it? I want solutions that prevent future crashes and keep my system stable.
Thanks for your help!
Hi everyone,
I recently experienced a Blue Screen of Death (BSOD) on my Windows PC, and the error message pointed to wdfilter.sys. I’m not sure what causes this file to trigger a BSOD or how to resolve it safely.
Can someone explain the possible reasons behind the wdfilter.sys BSOD and provide step-by-step methods to fix it? I want solutions that prevent future crashes and keep my system stable.
Thanks for your help!