Forum Replies Created
I’ve had it happen enough that I now touch the screen to wake it up, then insert the card and wait to make sure I get the “loading” confirmation message. If I don’t get the message after a few seconds, I remove the card and try again
The ONE night where I was anxious to look at my data in the morning so I could see if I could figure out why I woke up in some kind of panic around 2:30am, I get an SD card error message from my Airsense 11. It appears to be properly remounted and working now, but…dammit.
This was my first SD card error in about three weeks of using one. How often to I get to look forward to this?
My standard go to in this situation is to just scan the file system on the drive for errors. SD Cards can usually tolerate not being ejected very well. I also suggest never moving files to any flash drive by cut and paste, only copy and paste. While it’s not usually a problem, there is a higher chance of losing files with cut and paste if you accidentally remove the drive before transfer is done.
What brand is your ad card and what are you using to format it?
Best value in my opinion are the Sabrent v60 cards. v60 is really the rating you have to care about, it is the minimum guaranteed speed instead of the theoretical maximum speed. V90 is of course better, but much more expensive. V30 is kind of slow, and you only save a few bucks while getting half the speed. So v60 is the best bang for your buck.
Well… One time is probably fine as long as you weren’t transferring anything, as you said.
unless you had a program running on it though.
just to be sure:
If your on windows run a disk diagnostic (Go to file explorer, right click your disk, properties, then tools, and hit scan for errors, then click allow, etc…)
it should be fine regardless ive done this plenty of times on accident, once or twice your likely fine
Also how large is the SD card? Aren’t there restrictions with using FAT32 and how large the card can be before you format it?
Lexar Gold 1800X V60, i recommend this one because they are cheap, reliable (using 12 of them, no failure) and the fastest V60 out there, or any good quality v90 card will work the best
I was putting some information on it while watching a video and took it before ejecting properly, it wasn’t transferring anything but what do I do? Also nothing happened the sd card hasn’t done broken and I can still a access it perfectly but I’m afraid of it corrupting
Hey Mira,
You should NEVER use micro SD cards in a camera that needs normal SD cards.
I think the card is probably dead, just buy a new one. Make sure it’s one from a reputable brand.
I’ve had good luck with the SanDisk Extreme Pro’s. And PNY Pro Elite Primes(these are micro SD make sure adaptor can handle the speed).
When I try to put my SD card into my 3DS it gives me a pop up saying that it can’t detect a SD card. I tried reformatting it into FAT32 but it says it cant do a full long formatting and a quick on just gives the same error. I don’t know what to do and at this point i’m just gonna buy a nee SD card. Anyone have any ideas on whats wrong with it?
I’ve been shooting aviation and wildlife for a while and ive just bought a a7r3, but whenever I shoot a burst I have to wait for around 5 seconds, I currently have the Sandisk ultra 32gb 100mb/s.
No budget, any help is appreciated:)
What are you using it in?
What file system?