Forum Replies Created
Nice find, Safe Mode fix is solid. One more thing to add, this issue can also happen if your user profile or system files get slightly corrupted. Running an SFC scan (sfc /scannow) after you’re back in Windows helps clean up any leftover damage and prevents it from coming back. Also worth checking if any recent updates caused it and uninstalling the latest one if the problem started right after.
This usually means your system isn’t detecting a valid boot drive. First, check in BIOS if your SSD or HDD is showing up at all. If it’s missing, power off and reseat the drive or cables. If it is detected, make sure it’s set as the first boot device. You can also try loading BIOS defaults to fix any misconfig. If it still won’t boot, use a Windows installation USB and run Startup Repair. If that fails, the boot files may be corrupted, but your data is likely still there, so avoid reinstalling Windows until you’ve backed up or recovered anything important.
This usually happens when a Windows update is stuck or still processing in the background. First, let it run for a bit if an update is in progress. If it keeps spiking CPU, restart your PC, then go to Windows Update and click “Check for updates” to force it to complete. If that doesn’t help, run the Windows Update troubleshooter and clear the SoftwareDistribution folder by stopping the Windows Update service, deleting its contents, and restarting the service. Also make sure you have enough free disk space since low storage can trigger this issue.
Hey everyone, I recently ran the Windows Memory Diagnostic tool and it reported “hardware problems were detected.” My system still boots, but I’m worried this might lead to crashes or data loss. Before things get worse, what’s the safest way to back up or recover my important files? Should I avoid using the PC until I copy everything, and are there any reliable methods or tools to make sure I don’t lose data during this?
Hi everyone, I recently ran into the “File or Directory is Corrupted and Unreadable” error on my external drive and couldn’t access any of my files. I’m mainly concerned about recovering my data safely without making things worse. What’s the best approach here? Should I try CHKDSK first, or go straight to a data recovery method? Also, what’s the safest way to recover files if the drive is partially corrupted?
Hi all, my Windows 11 PC was getting stuck on the “Please wait for the GPSVC” message during login, and it would take forever or sometimes not load at all. Restarting didn’t really help. What finally worked for me was booting into Safe Mode, then restarting the Group Policy Client service and clearing temporary files. After that, the system logged in normally again. Sharing in case anyone else runs into this.
Hi everyone, my Windows 11 PC suddenly started booting straight into BIOS and won’t load Windows no matter what I do. I didn’t change any settings recently, and the drive was working fine before. I’ve tried restarting and exiting BIOS, but it keeps coming back. Could this be a boot order issue, a drive problem, or something else? What steps can I take to fix this without risking my data?
Hey everyone, I’ve noticed Modern Setup Host is suddenly using a lot of CPU on my Windows 11 system, especially during idle time. My fans ramp up and performance drops while it runs in the background. I’m not currently installing any updates manually, so this seems odd. I’ve tried restarting and pausing updates but it keeps coming back. Is this normal behavior or something stuck in the update process, and what’s the safest way to fix it without breaking Windows Update?
Put the SD into your computer and backup the contents if possible. I’m assuming your sd card is dying and needs to be replaced
I only d/l data every few weeks or so and I’ve never seen an error. I have an Airsense 10. Is this error seen on the 10’s too? Or only on the 11’s? Anyone see it on their AS10?
What are you using it in?
What file system?
I’ve had it happen enough that I now touch the screen to wake it up, then insert the card and wait to make sure I get the “loading” confirmation message. If I don’t get the message after a few seconds, I remove the card and try again
The ONE night where I was anxious to look at my data in the morning so I could see if I could figure out why I woke up in some kind of panic around 2:30am, I get an SD card error message from my Airsense 11. It appears to be properly remounted and working now, but…dammit.
This was my first SD card error in about three weeks of using one. How often to I get to look forward to this?
My standard go to in this situation is to just scan the file system on the drive for errors. SD Cards can usually tolerate not being ejected very well. I also suggest never moving files to any flash drive by cut and paste, only copy and paste. While it’s not usually a problem, there is a higher chance of losing files with cut and paste if you accidentally remove the drive before transfer is done.
Skip running CHKDSK at first if the data matters, since it can sometimes make recovery harder by changing the file structure. Try the drive on another PC or USB port to rule out connection issues. If the error stays, use a reliable tool like Stellar Data Recovery to scan the drive and recover your files to a different location. Once your data is safe, then you can run CHKDSK or format the drive to fix it.