Forum Replies Created
thanks
Hi, I’m looking for help to repair my corrupted videos. I don’t know why some of the videos got corrupted.
Using iPhone 12, iOS 18.1
Rebuilding RAID 6 on your HPE DL360 Gen10 with 5 SSDs can take a long time, especially while the server is in use. Even with SSDs, RAID 6 rebuilds involve heavy calculations and data movement, so it’s normal for the process to take several days or even more than a week.
The “Recovering” status you see in iLO means the rebuild is ongoing. Performance will be slower during this time, particularly if the rebuild priority is low or if the system is busy with other tasks.
To speed up the rebuild, check the RAID controller settings and increase the rebuild priority if possible. Reducing the server workload and making sure all firmware is up to date can also help. It’s also a good idea to check the health of the other drives.
Overall, long rebuild times and reduced performance are expected with RAID 6 under load. Keep monitoring the progress until the rebuild finishes.
You’re in a solid spot to get your data back. Having the old HP LTO-6 library, the controller card, and even the fiber cable still on-site saves a lot of time and money. That kind of luck rarely happens.
Now it’s just a matter of setting things up. Reinstall Data Protector, connect the drive, and make sure everything is detected properly. Start by testing a few tapes to see if they read without issues. If encryption was used, you’ll need the right password or key—hopefully, it wasn’t turned on or is still documented somewhere.
If the setup works, there’s no need to buy used hardware or pay for external recovery. You’ve got what you need—just go slow and careful, and you should be able to restore the data without too much trouble.
Your DS218+ has failed, and if you’re looking for a replacement, the DS224+ is the most straightforward option. It’s compact, runs the familiar DSM interface, and handles basic tasks like backups, Usenet downloads, and Plex. However, it lacks hardware for 4K Plex transcoding unless you rely on direct play or have a Plex Pass.
If Plex 4K support is important, QNAP might be the better choice. Models like the TS-464 come with better CPUs and built-in GPUs, making them more capable for media streaming. The interface isn’t as polished as Synology’s, but the hardware offers more flexibility and performance.
DIY NAS builds using Unraid or TrueNAS are also an option. These setups give you the most control and expandability but require technical knowledge to configure and maintain.
If you want something simple and reliable, stick with Synology or consider QNAP for better media support. If you’re ready to manage your own system, a custom build can be the most powerful option.
Hi everyone,
I’m having trouble with my SanDisk 512GB Ultra USB 3.0 flash drive. It recently became unreadable, and now no matter which computer or USB port I use, it either isn’t detected properly or appears as an unformatted device.
I’m using a Windows 11 system, and while the drive doesn’t show up with a letter in File Explorer, it does appear in Disk Management—but only as unallocated space. I had some really important files on it that I need to recover.
Has anyone experienced this before and successfully recovered their data from a similar situation?
Out of nowhere, my 1TB external SSD stopped responding. When I connect it to any of my three laptops, I get an error saying, “Insert a disk into USB drive.” The drive does show up in the system, but it’s greyed out and can’t be accessed at all. Has anyone faced something like this or knows what steps I can take to fix it? Any suggestions would be really helpful.
I’m facing a serious issue with my external SSD (it’s a Crucial X8 1TB). The files I’ve saved on it are gradually getting corrupted, and the number keeps increasing every day. Some files that were opening fine earlier are now unreadable.
I primarily use the drive with my Lenovo laptop running Windows 11, but I also tried accessing the files on a friend’s system that runs on Windows 10, and also on a system with Linux, but there also the same issue. Nothing seems to work.
If anyone has experienced this or knows what I can do to stop the corruption and possibly recover the data, please guide me.
I really need some help. This hard drive has years of family photos and important files that I never backed up anywhere else.
I have an old 2 TB external drive. The USB port on the controller board got damaged—looked rusty—and eventually stopped working. So I took the drive out of the enclosure and connected the internal SATA hard drive directly to my PC using SATA cables.
When I checked in File Explorer, it showed the drive as completely free. I’m sure it had over 900GB of data before this happened. I immediately shut down my PC because I didn’t want to mess anything up or risk overwriting anything.
Now I don’t know what to do next. Should I:
Try fixing the original controller board and reconnect the drive as it was?
Connect it again directly and run recovery software?
Or just take it to a data recovery expert and not risk anything further?
What I really want to know is:
Is there still a chance my data is recoverable?
If I reconnect the drive without writing anything to it, is it safe?
What should be my first step?
If anyone’s dealt with something like this before, I’d really appreciate some advice.
Hi Saje, if you’ve already tried the steps Mira shared and they didn’t work, there are a few more things you can check. Start by resetting the BIOS or UEFI to default settings, as this can sometimes help the system detect the hard drive again. Also, make sure the boot mode (UEFI or Legacy) matches how the drive was originally configured—any mismatch can lead to detection issues.
You can try connecting the hard drive externally using a USB enclosure or SATA-to-USB cable to see if another system detects it. Running a bootable diagnostic tool from a USB drive can also help check the drive’s health. If the drive is completely silent or making clicking noises, it could be a sign of physical failure.
If Mira’s suggestions worked for you, feel free to share what helped—it might assist others with the same issue. Let me know what you find.
Hi there!
I’d love to help you out. To understand the issue better, could you please share the following details?
Is the drive showing up in Disk Management (Windows) or Disk Utility (Mac)?
Are you using Windows, macOS, or something else?
When you connect the drive, do you hear any sound (like spinning or clicking)?
Have you tried a different USB port or cable?
Is this the first time you’re using the drive, or did it work before and suddenly stop showing up?
Once I have this info, I can guide you step-by-step. 😊
To restore very old backups from tape, start by identifying the tape format. Look for labels or documentation that mention whether it’s LTO, DLT, DDS, AIT, or another type. Also try to figure out what backup software was originally used to write the data.
Next, find a compatible tape drive. Older formats often require exact matches, and even LTO drives can usually only read tapes from two generations earlier. These drives are mostly available used—check eBay, tape hardware suppliers, or rental services. Make sure the drive’s interface matches your current setup—SCSI, SAS, or Fibre Channel.
You’ll also need backup software that can read the data. If the tapes were made using Backup Exec, NetBackup, or Arcserve, try to get the same version or something that can open those formats. For simpler backups, tools like dd or tar on Linux might work, especially if the data wasn’t compressed or encrypted.
If the tapes are in poor condition or you can’t get the right hardware and software, use a professional tape recovery service. They have legacy systems and know how to handle aging media safely.
When you’re ready to restore, it’s smart to create a raw image of the tape to avoid further wear. You can work from the image and keep the original tape untouched.
LTO-9 drives and tapes are overpriced in most retail listings. Drives go for around $4,000, and tapes are $100–$120 each. These prices don’t reflect what big data centers pay—they buy in bulk, negotiate deals, and pay far less.
There are ways to cut the cost. Used or refurbished LTO-8 and LTO-9 drives are often listed on eBay or sold by IT asset disposition companies for much less. Bulk tape purchases, especially unlabeled or white-label media, also bring the price down. You’ll often find better deals buying packs of 10 or more.
You can also watch for drives pulled from tape libraries. They’re usually cheaper and can be repurposed, though some come with OEM firmware restrictions. As long as you’re comfortable with SAS connections and doing a bit of research, they’re worth a look.
In short, skip the retail markup. Go used, buy in bulk, and check IT forums or data hoarder communities for leads. It takes some digging, but affordable LTO-9 setups are out there.
When a RAID array fails, selecting the right recovery software is essential. Stellar Data Recovery Technician works well for RAID 0, 5, and 6, especially when the array is not recognized or the configuration is unknown. It can rebuild arrays without needing the original controller.
Runtime GetDataBack RAID is a fast, reliable option for NTFS-based arrays if you know the disk order and block size. R-Studio Technician is suitable for more advanced or complex RAID setups, including damaged or nested arrays.
UFS Explorer RAID Recovery supports many file systems and is useful for recovering data from NAS devices and software-based RAID setups. DiskInternals RAID Recovery is a straightforward option for basic RAID 0/1/5 issues but may not handle complex failures well.
Before starting recovery, identify your RAID level and ensure the drives are not physically damaged. Stop using the array immediately to avoid overwriting data. If recovery software doesn’t work, it’s best to contact a professional data recovery service.
It’s quite common for videos to get corrupted on an iPhone. This can happen due to storage issues (like running out of space) or if your iOS isn’t up to date.
The latest iOS version is 18.5 — try updating your device to the latest version and see if the issue persists.